Home> Products> chemical resistant flooring

{ "products": [ { "_id": "633e718e82ec380001736e62", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Conplast constructive solutions ® MS", "description": "Uses\nConplast MS micro silica is primarily used to improve the\nproperties of hardened concrete where a reduction in\npermeability, increased durability and resistance to chlorides,\nsulphates, abrasion, frost attack and alkali silica reaction are\nrequired.\nAdvantages\n„ Significantly reduces permeability by minimising the\npenetration of moisture and aggressive elements\n„ Significant reduction in chloride ion penetration by reducing\ncontinuous capillary pores\n„ Improved mechanical properties\nDescription\nConplast MS supplied as a fine powder is added to the\nconcrete mix early during the mixing process. The resultant\nlow permeability concrete will exhibit improved mechanical\nproperties, and increased resistance to the effects of\nchlorides, sulphates, gases, frost attack and alkali silica\nreaction.\nTechnical Support\nFosroc provides a technical advisory service for on-site\nassistance and advice on admixture selection, evaluation\ntrials and dispensing equipment. Technical data and\nguidance can be provided for admixtures and other products\nfor use with fresh and hardened concrete.\nStandards compliance\nConforms to ASTM C1240-95a.\nDosage\nTypically 4 to 10% by weight of cement depending upon the\nspecific need. The optimum dosage of Conplast MS to meet\nspecific requirements should always be determined by trials\nusing the materials and conditions that will be experienced\nin use.\nPlease note higher addition levels are generally required\nwhere the high performance concrete such as high strength\nconcrete or underwater concrete is a pre-requisite.\nProperties\nChemical analysis\nSiO2 Min. 85%\nAlkalies as Na2\nO Max. 1%\nLoss on ignition Max.5%\nBulk density Approx. 610 kg/m3\nApplication instructions\nDispensing and mixing\nConplast MS should always be added in the early stages of\nthe mixing process. It is recommended that Conplast MS be\nweight batched to the required quantity prior to addition to the\nmix.\nIn dry batching operations, Conplast MS should be dry\nblended with aggregates and cement prior to the addition of\nwater to the mixer. In wet batching operations Conplast MS\nshould be added to the mixer at the same time as the cement.\nConplast MS can if required, be added to the mixer in slurry\nform.\nIn order to achieve a low water cement ratio, the use of high\nrange water reducing admixtures such as Conplast SP430,\nConplast SP423 are highly recommended.\nPlacing\nWhen producing concrete with Conplast MS we suggest a\ntarget slump in the range of 25 to 35 mm in excess of the\nnormal slump requirement, this will accomodate the additional\ncohesion promoted by the use of Conplast MS.\nConcrete produced with Conplast MS will have greatly\nimproved cohesive qualities.\nEstimating\nPackaging\nConplast MS is available in 15 kg bags.\nStorage\nConplast MS has a minimum shelf life of 12 months if stored\nin a dry location in unopened packs\nConplast® MS\nINDIA/2005/0121/D\nImportant note :\nFosroc products are guaranteed against defective materials and manufacture and are sold subject\nto its standard terms and conditions of sale, copies of which may be obtained on request. Whilst\nFosroc endeavours to ensure that any advice, recommendation specification or information it may\ngive is accurate and correct, it cannot, because it has no direct or continuous control over where\nor how its products are applied, accept any liability either directly or indirectly arising from the\nuse of its products whether or not in accordance with any advice, specification, recommendation\nor information given by it.\ntelephone fax e-mail\n++91 80-22240018/120 ++91 80-22233474 india@fosroc.com\nFosroc Chemicals (India) Pvt. Ltd.\nHead Office\n111/3, Hafeeza Chamber II Floor,\nK H Road, PBNo. 2744, Bangalore 560027\nwww.fosroc.com\n® Denotes the trademark of Fosroc International Limited\n Regional Offices\nBangalore Mumbai Delhi Kolkata\nShankar House, IV Floor 208/209, Persepolis First floor,1/2 East Patel Nagar P-569, Lake Terrace Extn.\n1 & 18, RMV Extension Sector 17, Vashi Opp: Vivek Cinema, Main Patel Rd First Floor\nBangalore 560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700 029\nPh:080-2361 3161/2361 2004 Ph:022-2789 6412/14 Ph:011-25884903/4 Ph: 033 24650917 / 55343188\nFax : 080-2361 7454 Fax: 022 - 2789 6413 Fax: 011- 25884422 Fax: 033-24650891\nemail: Bangalore@fosroc.com email:Mumbai@fosroc.com email:Delhi@fosroc.com email:Kolkata@fosroc.com\nz Ahmedabad : (079) 26762799 z Ankleshwar :(02646) 220704/224687 z Bhubaneshwar : (0674) 2546415 z Chennai (044) 24899949/24853383\nz Chandigarh : (0172) 2639360 z Cochin : (0484) 2356668 z Coimbatore : (0422) 2472966 z Goa : (0832) 2542465 z Guwahati (0361) 2548793\nz Hyderabad : (040) 27662324/27662425 z Hubli (0836) 09343402597 z Indore : (0731) 504339/5061477 z Jaipur : (0141) 2235349\nz Jamshedpur: (0657) 2223848 z Lucknow :(0522) 2239044 z Nagercoil 09842134873 z Visakhapatnam : (0891) 2564850 / 2707607\nPrecautions\nHealth and Safety\nConplast MS is non-flammable. It may cause dust pollution\nand irritation to respiratory tract. Hence wear suitable dust\nmask, protective gloves and goggles while handling the\nmaterial. Incase of contact with eyes, rinse immediately with\nplenty of water and seek medical advice. If swallowed, seek\nmedical attention immediately - do not induce vomitting.\nCleaning and disposal\nThe disposal of excess or waste material should be carried\nout in accordance with local statutory requirements.\nAdditional Information\nIn addition to concrete admisture, Fosroc manufactures a\nwide range of complementary products which includes\nwaterproofing membranes, joint sealants, grouts and anchors\nand specialised flooring materials.\nAdditionally, a wide range of products specifically designed\nfor the repair and refurbishment of damaged reinforced\nconcrete is available.\nThis include hand-placed and spray-grade repair mortars,\nfluid micro-concretes, chemical resistant epoxy mortars and\na comprehensive package of protective coatings.\nFor further information please contact your local Fosroc office", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Conplast MS", "MS micro silica", "2639360 z Cochin", "2546415 z Chennai", "2223848 z Lucknow", "2542465 z Guwahati", "09343402597 z Indore", "2356668 z Coimbatore", "26762799 z Ankleshwar", "high performance concrete", "recommendation specification", "Conplast constructive solutions", "chemical resistant epoxy mortars", "2239044 z Nagercoil 09842134873 z Visakhapatnam", "560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 56, "imageuri": "https://productimages.withfloats.com/actual/633e718fc053710001311310.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/633e718fc053710001311310.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-06T06:11:26.004Z", "updatedon": "2022-10-06T06:11:26.004Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/conplast-constructive-solutions-ms/56", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "FOSROC", "category": "Admixtures", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "634645f05e86a40001340741", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "JOINTS, SEALANTS AND WATERPROOFING", "description": "Fosroc’s extensive range of Joints, Sealants and Waterproofing , manufactured to the highest quality standards backed by independent test certificates.Flexible jointing materials filling gaps and sealing slots between two elements to provide future movement and sealing against wind, rain, fire and chemicals. Fosroc sealants can be found in many stadia throughout the world providing watertight and fire-rated seals.\n\n Fosroc include waterproof membranes, waterstops, joint sealants, concrete repair mortars, resin flooring, protective coatings, structural strengthening, grouts and concrete admixtures manufactured to the highest quality Standards. Fosroc offers one of the most comprehensive ranges in belowground waterproofing, providing leak-free buildings around the world.We have waterproofing systems providing the most up-to-date technologies from basement to roof to ensure long lasting integrity and durability of your building structure.\n\n Fosroc waterproofing products are available as preformed, torch-on or liquid or spray applied membranes. Fosroc also supply swelling waterstops, polyurea coatings and drainage membranes. Our range of sealants include the hioflex, Colpor, Nitoseal brands and a MS polymer façade sealant range. Fosroc fireproofing products include flexible intumescent sealants and one or two part ranges for all fire ratings.\n\nProducts: Thioflex, Colpor, Nitoseal\n\nFlexible materials enabling relative movement of components of a structure and preventing the ingress of water, wind or chemicals.\n\nOne-part easy installation, long service life\nLong established two-part range for transport sector\nWater industry suitable products\nMS Polymer façade range\nProducts:\nThiflex 600GG-PG\nNitoproof 100/120\nBrushbond\nBrushbond RFX\nBrushbond TGP\nBrushbond Coolcoat\nHydroproof", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Fosroc sealants", "extensive range", "polyurea coatings", "quality standards", "drainage membranes", "jointing materials", "concrete admixtures", "protective coatings", "waterproof membranes", "waterproofing systems", "long lasting integrity", "concrete repair mortars", "Fosroc fireproofing products", "Fosroc waterproofing products", "flexible intumescent sealants" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 65, "imageuri": "https://productimages.withfloats.com/actual/634645f7860d960001136b08.png", "tileimageuri": "https://productimages.withfloats.com/tile/634645f7860d960001136b08.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-12T04:43:28.628Z", "updatedon": "2022-10-12T04:43:28.628Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN//joints-sealants-and-waterproofing/65", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "FOSROC", "category": "FOSROC", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "634645a5ffd5ca00014f960a", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PROTECTIVE COATINGS", "description": "Protective Coatings : High performance protective, chemical resistant and decorative coatings for concrete, steel and other substrates.\n\nHigh efficiency primers\nHigh performance products\nSystematic approach to repairs\nChemically resistant resins\nExcellent chemical resistance\nProducts:\nDeckguardS / Std\nNitocote EP405\nNitocote ET550\nNitocote ET140\nNitocote UR512\nNitocote SN522", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "steel", "SN522", "concrete", "approach", "efficiency", "chemical resistant", "Protective Coatings", "decorative coatings", "High performance protective" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 64, "imageuri": "https://productimages.withfloats.com/actual/634645a7aadead0001827ad1.png", "tileimageuri": "https://productimages.withfloats.com/tile/634645a7aadead0001827ad1.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-12T04:42:13.083Z", "updatedon": "2022-10-12T04:42:13.083Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/protective-coatings/64", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "FOSROC", "category": "FOSROC", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "633e70fb0e709c00019af791", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Cebex ® 112 constructive solutions", "description": "Uses\nTo improve workability and trowelling properties of sand/\ncement mortar mixes during application. To increase quality\nof masonry and plastering.\nAdvantages\n„ Improved moisture retention and bond strength: Slows\ndown drying out of mortar which remains workable longer.\nEnsures better bond to all surfaces, including ceiling.\n„ Makes mortar crack resistant : Minimises drying\nshrinkage cracks and increases frost resistance in cold\nclimates.\n„ High workability : Even with harsh sands, makes creamy\neasy-to-apply mortar.\n„ Cost saving : Increase yield of the same quantity of sand/\ncement. Extra coverage normally exceeds material costs.\n„ Better & safer masonry : Mortar fills joints easily and\nefficiently and ensures stronger construction.\n„ Improved appearance : Mortar cuts cleanly from faces of\nbrick, block or stone work.\n„ Increased productivity : Speeds up work by easy\napplication of mortar.\nDescription\nCebex 112 is supplied as an off-white to pale yellow liquid\nwhich mixes readily with water in any proportions. It is based\non internationally recognised chemicals and is free from\ncalcium chloride and similar salts.\nTechnical support\nFosroc offers technical support service to specifiers, end\nusers and contractors, as well as on-site technical\nassistance in locations all over the country.\nProperties\nChloride content : Nil\nCompatibility with cements : Can be used with any type of\nPortland, Super Sulphate, Blast furnace or Pozzolanic\ncements.\nSetting time : There is no significant effect on the setting of\nsand/cement mortars.\nPlasticising action : Cebex 112 entrains a controlled amount\nof microscopic air bubbles which increase cohesion and\nprovide lubrication to the sane particles in the mix, thereby\nimparting improved workability to the mortar. The air bubbles\nhold the cement/water matrix at the contact surfaces which\nresults in improved bond strengths.\nFrost resistance : Where this is a consideration, that air\nentrainment appreciably increases the frost resistance of the\nfully cured mortar and also improves that of fresh mortar, as\nestablished by international practice.\nIncreased yield : The special action of Cebex 112 causes\nthe cement particles to disperse evenly throughout the mix,\nwhich combined with its air entrainment property, expands\nthe volume of the mortar. Increase in yield for the same\nquantities of sand and cement is typically between 8% and\n18%, depending upon the coarseness or fineness of the\nsand used.\nWith typical mixes of 1:3 and 1:4 cement : sand, the cost of\nCebex 112 will normally be recovered and, in most cases, a\nnet cost saving will be obtained, as a result of the increased\nyield.\nApplication instructions\nMixing\nCebex 112 Mortar Plasticiser may be added either direct to\nan individual mix or to the gauging water, depending upon\nsite convenience.\nDirect to the mix\n1. Use between 0.100 and 0.200 litres of Cebex 112 per\n100kgs of cement. Soft fine sand will require least and harsh\nsands most. Site trials will best determine the practical rate\nof addition in each case and are recommended.\n2. Cebex 112 to be stirred thoroughly before use. Measure\nthe total required quantity of Cebex 112 and stir into the first\nbucket of the gauging water.\n3. After dry mixing the sand/cement in the normal way, add\nthe Cebex 112 and start wet mixing.\n4. Continue adding plain water and mixing the mortar until\nthe required workability is obtained.\nNote : Do not add Cebex 112 directly to dry sand/cement\nmortar.\n1. Add between 0.100 and 0.2 litres of Cebex 112 to every\n100 litres of water and stir well to ensure even dispersion.\nMortar Plasticiser\nCebex® 112\nINDIA/2004/0112/A\nImportant note :\nFosroc products are guaranteed against defective materials and manufacture and are sold subject\nto its standard terms and conditions of sale, copies of which may be obtained on request. Whilst\nFosroc endeavours to ensure that any advice, recommendation specification or information it may\ngive is accurate and correct, it cannot, because it has no direct or continuous control over where\nor how its products are applied, accept any liability either directly or indirectly arising from the\nuse of its products whether or not in accordance with any advice, specification, recommendation\nor information given by it.\ntelephone fax e-mail\n++91 80-22240018/120 ++91 80-22233474 india@fosroc.com\nFosroc Chemicals (India) Pvt. Ltd.\nHead Office\n111/3, Hafeeza Chamber II Floor,\nK H Road, PBNo. 2744, Bangalore 560027\nwww.fosroc.com\n® Denotes the trademark of Fosroc International Limited\n Regional Offices\nBangalore Mumbai Delhi Kolkata\nShankar House, IV Floor 208/209, Persepolis First floor,1/2 East Patel Nagar 30/B Jodhpur Park\n1 & 18, RMV Extension Sector 17, Vashi Opp: Vivek Cinema, Main Patel Rd Ground Floor\nBangalore 560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700 068\nPh:080-2361 3161/2361 2004 Ph:022-2789 6412/14 Ph:011-25884903/4 Ph: 033 2472 5482\nFax : 080-2361 7454 Fax: 022 - 2789 6413 Fax: 011- 25884422 Fax: 033-2472 9921\nemail: Bangalore@fosroc.com email:Mumbai@fosroc.com email:Delhi@fosroc.com email:Kolkata@fosroc.com\nzAhmedabad : (079) 26762799 zAnkleshwar :(02646) 220704/224687 z Bhubaneshwar : (0674) 2521176 z Chennai (044) 24899949/24853383\nzChandigarh : (0172) 2639360 z Cochin : (0484) 2356668 zCoimbatore : (0422) 2472966 zGoa : (0832) 2542465 zGuwahati (0361) 2548793\nzHyderabad : (040) 27662324/27662425 z Hubli (0836) 3402597 zIndore : (0731) 504339/5061477 z Jaipur : (0141) 2235349 z Lucknow :(0522)\n22239044 z Nagercoil (04652) 2224849 z Mangalore: (0824) 22272234 z Visakhapatnam : (0891) 2564850\n2. Use the Cebex 112 to make the mortar in the usual way\nand keep adding and mixing until the required workability is\nobtained.\nLime Mixes :\nWhere a small quantity of hydrated lime is usually added to a\nsand/cement mix to fattiness and plasticity, the lime may\nnormally be omitted and Cebex 112 used to replace it with\neconomic benefits.\nCuring : Mortar containing Cebex 112 should be properly\ncured in accordance with accepted practice and protected\nagainst sun and drying winds.\nOverdosing : Overdosing of Cebex 112 will result in increased\nworkability and air entrainment.\nCleaning : Spillages of Cebex 112 should be removed with\nwater.\nLimitations\nExcess dosage of Cebex 112 will result in reduction of the\nfinal strength of the mortar. An overdose of double the\nrecommended measure of Conplast P509 will result in\nincreased retardation of the initial set of the concrete. The\nultimate strength of the concrete will not be affected and could\nbe increased if advantage is taken of the increased workability\nby reducing water.\nEstimating\nPackaging\nCebex 112 is supplied in 100ml, 1, 5, 20 and 200 litre\ncontainers.\nStorage\nShelf life\nCebex 112 has a minimum shelf life of 12 months under\nnormal ambient temperatures. It should be protected from\ntemperatures above 400\nC and stored in shade.\nPrecautions\nHealth and safety instructions\nCebex 112 is mildly alkaline. Avoid contact with the skin.\nAccidental splashes to eyes should be washed immediately\nwith plenty of water and medical treatment sought.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "2521176 z Chennai", "Cebex 112 entrains", "2224849 z Mangalore", "112 Mortar Plasticiser", "microscopic air bubbles", "22272234 z Visakhapatnam", "air entrainment property", "Hafeeza Chamber II Floor", "technical support service", "112 constructive solutions", "Improved moisture retention", "Makes mortar crack resistant", "recommendation specification", "560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 55, "imageuri": "https://productimages.withfloats.com/actual/633e70fcc7108a0001f7cb22.png", "tileimageuri": "https://productimages.withfloats.com/tile/633e70fcc7108a0001f7cb22.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-06T06:08:59.201Z", "updatedon": "2022-10-06T06:08:59.201Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN//cebex-112-constructive-solutions/55", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "FOSROC", "category": "Admixtures", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "633e59dd0e709c00019af57a", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " SURFACE COATINGS", "description": "Products: Dekguard, Nitocote, Polyurea\n\nHigh performance protective, chemical resistant and decorative coatings for concrete, steel and other substrates.\n \n1. High efficiency primers\t\n2. Chemically resistant resins\n3. High performance products\t\n4. Excellent chemical resistance\n5. Systematic approach to repairs", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "repairs", "concrete", "Dekguard", "Nitocote", "High efficiency", "High performance", "SURFACE COATINGS", "chemical resistant", "Excellent chemical", "decorative coatings", "Systematic approach", "Chemically resistant", "performance protective" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 51, "imageuri": "https://productimages.withfloats.com/actual/633e59dfc88ac00001bfaa4e.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/633e59dfc88ac00001bfaa4e.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-06T04:30:21.129Z", "updatedon": "2022-10-06T04:30:21.129Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/-surface-coatings/51", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "CONSTRUCTION CHEMICALS", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63464735ffd5ca00014f9625", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "ADHESIVES", "description": "Adhesives are jointing materials used to act as a bonding agent to provide structurral integrity. Concrete bonding agents, tile and general-purpose adhesives for use with concrete structures.\n\nAdhesives are typically used for fast, reliable, high-performance bonding of numerous materials in just seconds.\n\nCost effective project specific solutions\nExtensive product portfolio choice\nEasily applied systems\nProven technologies ensuring long term durability\nWorld class brands – Nitobond, Nitotile\nSpecification assistance\nExpert technical advice and customer service\nComplementary underlay levelling portfolio for tiling solutions\nAdhesive Selection\nAdhesive selection involves the following considerations:\n\nSubstrates: What are you trying to bond? Are the surfaces the same or dissimilar, porous or smooth? Are you covering a large area? Do you have heat or solvent sensitive surfaces?\nApplication restrictions: How do you intend to apply the adhesive- examples: spray, roll, heat gun, cartridge, squeeze bottle?\nUse Requirements: How does the bonded piece get used? How much strength is required? For example, bonding wood requires much more strength than decorative paper crafts do. What kind of environments might it see? Will it experience temperature extremes or water/steam?\nAreas of usage:\nResidential and commercial floors and walls\nSwimming pools\nExternal cladding\n \n\nAquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.\n\nProducts\n\nNitotile GP\nNitotile MPA\nNitobond EP\nNitobond EP(Std)\nNitoBond AR (STD)\nNitobond SBR Latex", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "much strength", "considerations", "Fosroc Chemicals", "technical advice", "product portfolio", "Fosroc applicator", "commercial floors", "numerous materials", "temperature extremes", "structurral integrity", "project Super stockist", "decorative paper crafts", "Concrete bonding agents", "effective project specific", "solvent sensitive surfaces" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 66, "imageuri": "https://productimages.withfloats.com/actual/634647371d46690001542279.png", "tileimageuri": "https://productimages.withfloats.com/tile/634647371d46690001542279.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-12T04:48:53.918Z", "updatedon": "2022-10-15T10:46:45.332Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN//adhesives/66", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "FOSROC", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63464530b64ec200014bc6bb", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "INDUSTRIAL FLOORING", "description": "Products: Cemtop, Nitoflor, Polyurea\n\nCoatings, toppings, and screeds to provide improved performance to new and existing concrete floors.\n\nEnhanced chemical resistance\nIncreased durability and strength\nAbrasion and impact resistance\nClean-environment, trafficable finish\nProducts:\n\nNitoflor Hardtop / HardtopStandard\nNitoflor FC140 / 145", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "145", "new", "FC140", "impact", "Cemtop", "screeds", "Hardtop", "Nitoflor", "chemical", "concrete", "toppings", "durability", "performance", "trafficable", "INDUSTRIAL FLOORING" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 63, "imageuri": "https://productimages.withfloats.com/actual/63464533821b47000129c03b.png", "tileimageuri": "https://productimages.withfloats.com/tile/63464533821b47000129c03b.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-12T04:40:16.985Z", "updatedon": "2022-10-12T04:40:16.985Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/industrial-flooring/63", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "FOSROC", "category": "FOSROC", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63464477446afc000130fd2a", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "GROUTS AND ANCHORS", "description": "Cement and resin-based products to fill voids beneath (or between) load-bearing units. Resin-anchoring systems to install permanent and removable anchors and fixings.\n\nWith exceptional flow, stability and strength characteristics, our grouts provide the best solution for high precision and critical applications, together with a wide range of cement and resin based anchoring systems. The range of grouts and anchors is tested and outperforms industry laid norms and standards.\n\nExcellent chemical resistance\nLong and distinguished track record\nAssured bonding of critical fixings\nHigh strength high performance\nCost effective, project specific solutions\nProven technologies ensuring long term performance\n There is a wide range of structural grouts available from Fosroc. Fosrocs Grout Range is ideal for high intensity and high quality construction, we know that effective grouting and anchoring relies on more than strength alone.Cement and Epoxy resin grouts for construction applications including grouting baseplates, machine bases, rails and all sorts of voids in new construction and repair work\n\n Anchoring systems consist of epoxy, polyester and vinylester injection and anchoring systems suitable for application of threaded rods, bolts, reinforcing bars and starter bars into concrete and masonry.By utilising global experience and expertise, Fosroc grout and anchor solutions deliver some of the world’s most innovative product range.\n\nProducts\nGeneral Purpose Grouts:\n\nConbextra GP1\nConbextra GP2\nConbextra EP10 (M)\nCebex 100\nCebex 200\nLokfix Range", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "strength high", "systems suitable", "Anchoring systems", "removable anchors", "Epoxy resin grouts", "fill voids beneath", "innovative product", "Fosrocs Grout Range", "outperforms industry", "vinylester injection", "critical applications", "strength characteristics", "high quality construction", "construction applications", "structural grouts available" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 61, "imageuri": "https://productimages.withfloats.com/actual/634644781d46690001542228.png", "tileimageuri": "https://productimages.withfloats.com/tile/634644781d46690001542228.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-12T04:37:11.075Z", "updatedon": "2022-10-12T04:37:11.075Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/grouts-and-anchors/61", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "FOSROC", "category": "FOSROC", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "633e5abafc69ea00017b9dfc", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " SEALANTS", "description": "Products: Thioflex, Colpor, Nitoseal\n\nFlexible materials enabling relative movement of components of a structure and preventing the ingress of water, wind or chemicals.\n \n1. One-part easy installation, long service life\t\n2. Water industry suitable products\n3. Long established two-part range for transport sector\t\n4. MS Polymer façade range", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "range", "Colpor", "ingress", "service", "SEALANTS", "Thioflex", "structure", "materials", "transport", "MS Polymer", "components", "relative movement", "easy installation", "Water industry suitable" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 53, "imageuri": "https://productimages.withfloats.com/actual/633e5abcc053710001310c85.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/633e5abcc053710001310c85.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-06T04:34:02.198Z", "updatedon": "2022-10-06T04:34:02.198Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN//-sealants/53", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "CONSTRUCTION CHEMICALS", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }