Home> Products> large storage capacity

{ "products": [ { "_id": "5b6b35405b3b1d05029da966", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Graco 200 DI Airless Sprayer (Paint/Epoxy/Putty)", "description": "Graco 200 DI Airless Sprayer\n\nThe 200 Di Convertible is the solution for medium to large jobs where proven hydraulic power is demanded to get the job done. With the ability to change out the pump lower and convert to electric power without tools, you can be assured that you have the most versatile sprayer on the market today.\n\n\nFeatures:\n\n1. High Efficiency Hydraulic Pump - faster more responsive changeover and fewer moving parts for easier \nmaintenance and longer life\n2. MaxLife Endurance Pump delivers unmatched durability and life\n3. ProConnect Pump Removal and Installation allows you to remove and replace the pump in seconds, saving time and \nsmoney on the job\n4. High capacity cooling system with innovative hydaulic reservoir design and cooling fins to deflect heat away from sprayer\n5. Quickly and easily converts from gas to electric without tools\n6. Easy Out Filter removes with the cap for less mess, reduces tip clogs and ensures quality finish\n7. Crush-Proof Rock Catcher provides unmatched pump protection\n\n\nMaterials:\n\n1. Latex Paints and Primers \n2. Acrylic Paints and Primers\n3. Oil-Based Paints and Primers\n\n\nApplications:\n\n1. Interior/Exterior Residential\n2. New Construction\n3. Heavy Commercial\n4. Industrial\n5. Many Interior Applications (with electric motor)\n\n\nIncludes:\n\n1. Contractor Gun\n2. RAC X 517 SwitchTip and Guard\n3. 1/4 in x 50 ft (6.4 mm x 15.2 m) BlueMax II Hose\n4. Electric Motor Kit (Non CSA)", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "High capacity", "unmatched pump", "electric power", "Acrylic Paints", "Di Convertible", "hydraulic power", "versatile sprayer", "DI Airless Sprayer", "Electric Motor Kit", "responsive changeover", "ProConnect Pump Removal", "Many Interior Applications", "High Efficiency Hydraulic Pump", "innovative hydaulic reservoir design", "MaxLife Endurance Pump delivers unmatched durability" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 10, "imageuri": "https://productimages.withfloats.com/actual/5a68364a0774480a14efa263.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5a68364a0774480a14efa263.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-01-24T07:31:22.533Z", "updatedon": "2022-10-06T04:47:37.293Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/graco-200-di-airless-sprayer-paint-epoxy-putty-/10", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": true, "maxcodorders": -1, "maxprepaidonlineorders": -1, "uniquepaymenturl": null, "brandname": "GRACO ", "category": "Power Tools ", "tags": [ "" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b35405b3b1d05029d9c9c", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Fbn Anchor Bolts", "description": "Anchor bolt for push-through and pre-positioned installation.\nWhen the hexagon nut is tightened, the tapered bolt is pulled into the expansion clip and expands it against the drill hole wall.\nStainless steel version of the corrosion resistance class III, e.g. A4, for outdoor use and in damp conditions.\nGS version with large washer for timber construction.\n\n\nAdvantages/Benefits : \n\n1. FBN II offers maximum load-bearing capacity in non-cracked concrete – anchoring base can not bear higher loads - is totally \n utilised.\n2. Reduced anchorage depth reduces drill time – this saves time and reduces \n reinforcement hits during drilling.\n3. Long thread allows stand-off installations and variable usable lengths.\n4. Diameter 8 to 20 mm also for reduced anchorage depths, e.g. for small loads \n or if reinforcement is hit.\n5. Embossed letter on the head for subsequent control of the installation as it \n indicates the setting depth.\n\n\nInstallation\nPush-through and pre-positioned installation\n\n\nInstallation tips\n\n1. For series installation we recommend the Anchor bolt setting tool FABS (see \n page 123) to reduce installation time.\n2. Before driving in, the hexagon nut should be brought into the optimal \n installation position (the bolt projects by 2 to 3 mm).\n\n\nAlso suitable for : \n\n1. Concrete C12/15\n2. Natural stone with dense structure\n\n\nFor fixing of:\n\n1. Steel constructions\n2. Railings\n3. Consoles\n4. Ladders\n5. Cable trays\n6. Machines\n7. Staircases\n8. Gates\n9. Facades\n10. Window elements\n11. Wood constructions", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "tapered bolt", "Anchor Bolts", "bolt projects", "steel version", "expansion clip", "variable usable", "reinforcement hits", "subsequent control", "series installation", "installation position", "corrosion resistance class", "Reduced anchorage depth reduces drill time" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 5, "imageuri": "https://productimages.withfloats.com/actual/5a682c074d1219051ceb18fd.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5a682c074d1219051ceb18fd.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-01-24T06:47:35.527Z", "updatedon": "2022-10-06T04:59:26.675Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/fbn-anchor-bolts/5", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": -1, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Anchor Fastner", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63464735ffd5ca00014f9625", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "ADHESIVES", "description": "Adhesives are jointing materials used to act as a bonding agent to provide structurral integrity. Concrete bonding agents, tile and general-purpose adhesives for use with concrete structures.\n\nAdhesives are typically used for fast, reliable, high-performance bonding of numerous materials in just seconds.\n\nCost effective project specific solutions\nExtensive product portfolio choice\nEasily applied systems\nProven technologies ensuring long term durability\nWorld class brands – Nitobond, Nitotile\nSpecification assistance\nExpert technical advice and customer service\nComplementary underlay levelling portfolio for tiling solutions\nAdhesive Selection\nAdhesive selection involves the following considerations:\n\nSubstrates: What are you trying to bond? Are the surfaces the same or dissimilar, porous or smooth? Are you covering a large area? Do you have heat or solvent sensitive surfaces?\nApplication restrictions: How do you intend to apply the adhesive- examples: spray, roll, heat gun, cartridge, squeeze bottle?\nUse Requirements: How does the bonded piece get used? How much strength is required? For example, bonding wood requires much more strength than decorative paper crafts do. What kind of environments might it see? Will it experience temperature extremes or water/steam?\nAreas of usage:\nResidential and commercial floors and walls\nSwimming pools\nExternal cladding\n \n\nAquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.\n\nProducts\n\nNitotile GP\nNitotile MPA\nNitobond EP\nNitobond EP(Std)\nNitoBond AR (STD)\nNitobond SBR Latex", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "much strength", "considerations", "Fosroc Chemicals", "technical advice", "product portfolio", "Fosroc applicator", "commercial floors", "numerous materials", "temperature extremes", "structurral integrity", "project Super stockist", "decorative paper crafts", "Concrete bonding agents", "effective project specific", "solvent sensitive surfaces" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 66, "imageuri": "https://productimages.withfloats.com/actual/634647371d46690001542279.png", "tileimageuri": "https://productimages.withfloats.com/tile/634647371d46690001542279.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-12T04:48:53.918Z", "updatedon": "2022-10-15T10:46:45.332Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/adhesives/66", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "FOSROC", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "633e7211aa22bf0001371037", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Conplast constructive solutions ® RMC444M1", "description": "Uses\nConplast RMC444M1 is used where a high degree of\nworkability and its retention are required, where delays in\ntransportation or placing are likely or when high ambient\ntemperatures cause rapid slump loss. It facilitate production\nof high quality concrete.\nAdvantages\n„ Ready Mixed Concrete- Increased workability and\nworkability retention minimise the risks of long distance\ndeliveries\n„ Increased strength - Provides high early strength for\nprecast concrete if water reduction is taken advantage of.\n„ Improved quality - Denser, close textured concrete with\nreduced porosity and hence more durable.\n„ Higher cohesion - Risk of segregation and bleeding\nminimised; thus aids pumping of concrete\n„ Chloride free - Safe in prestressed concrete and with\nsulphate resisting cements and marine aggregates.\nStandards\nConplast RMC444M1 complies with IS:9103:1999 and\nBS:5075 Part 3 and ASTM-C-494 Type 'F' as a high range\nwater reducing admixture and Type G at high dosage.\nDescription\nConplast RMC444M1 is supplied as a brown liquid instantly\ndispersible in water.\nConplast RMC444M1 has been specially formulated to give\nhigh water reductions upto 25% without loss of workability or\nto produce high quality concrete of reduced permeability.\nProperties\nSpecific gravity 1.20 to 1.21 at 300\nC\nChloride content Nil. to IS:9103-1999and BS:5075\nAir entrainment Approx. 1.5% additional air\nover control\nCompatibility : Can be used with all types of cements except\nhigh alumina cement. Conplast RMC444M1 is compatible\nwith other types of Fosroc admixtures when added separately\nto the mix. Site trials should be carried out to optimise\ndosages. Conplast RMC444M1 is suitable for use with all\ntypes of OPC and cement replacement materials such as\nPFA, GGBFS and microsilica.\nWorkability : Can be used to produce flowing concrete that\nrequires no compaction. Some minor adjustments may be\nrequired to produce high workable mix without segregation.\nCohesion : Cohesion is improved due to dispersion of cement\nparticles thus minimising segregation and improving surface\nfinish.\nCompressive strength : Conplast RMC444M1 is primarily\nhighly efficient superplasticiser giving large increase in\nworkability without significant change in compressive\nstrength.\nConplast RMC444M1 may be used to produce substantial\nwater reduction resulting in a considerable increase in\ncompressive strength.\nDurability : Reduction in W/C ratio enables increase in density\nand impermeability thus enhancing durability of concrete.\nApplication instructions\nDosage\nThe optimum dosage is best determined by site trials with\nthe concrete mix which enables the effects of workability,\nstrength gain or cement reduction to be measured. Site trials\nwith Conplast RMC444M1 should always be compared with\nmix containing no admixture. As a guide, the rate of addition\nis generally in the range of 0.6 - 1.5 litres /100 kg cement. For\nany deviations in dosage in special applications, please\ncontact Fosroc Technical Services.\nOverdosing\nAn over dose of double the recommended amount of Conplast\nRMC444M1, will result in very high workability and some\nretardation of setting time will occur. However, the ultimate\ncompressive strength will not be impaired.\nDispensing\nThe measured quantity of Conplast RMC444M1 should be\nadded along with the gauging water. For best results, add\nConplast RMC444M1 in the last phase after prewetting the\nmix with 80% of the total water required.\nMix design\nFosroc has an advisory service on Concrete Mix Design and\ncan be contacted if assistance is required.\nConplast® RMC444M1\nINDIA/2005/01-120/A\nImportant note :\nFosroc products are guaranteed against defective materials and manufacture and are sold subject\nto its standard terms and conditions of sale, copies of which may be obtained on request. Whilst\nFosroc endeavours to ensure that any advice, recommendation specification or information it may\ngive is accurate and correct, it cannot, because it has no direct or continuous control over where\nor how its products are applied, accept any liability either directly or indirectly arising from the\nuse of its products whether or not in accordance with any advice, specification, recommendation\nor information given by it.\ntelephone fax e-mail\n++91 80-22240018/120 ++91 80-22233474 india@fosroc.com\nFosroc Chemicals (India) Pvt. Ltd.\nHead Office\n111/3, Hafeeza Chamber II Floor,\nK H Road, PBNo. 2744, Bangalore 560027\nwww.fosroc.com\n® Denotes the trademark of Fosroc International Limited\n Regional Offices\nBangalore Mumbai Delhi Kolkata\nShankar House, IV Floor 208/209, Persepolis First floor,1/2 East Patel Nagar P-569, Lake Terrace Extn.\n1 & 18, RMV Extension Sector 17, Vashi Opp: Vivek Cinema, Main Patel Rd First Floor\nBangalore 560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700 029\nPh:080-2361 3161/2361 2004 Ph:022-2789 6412/14 Ph:011-25884903/4 Ph: 033 24650917 / 55343188\nFax : 080-2361 7454 Fax: 022 - 2789 6413 Fax: 011- 25884422 Fax: 033-24650891\nemail: Bangalore@fosroc.com email:Mumbai@fosroc.com email:Delhi@fosroc.com email:Kolkata@fosroc.com\nz Ahmedabad : (079) 26762799 z Ankleshwar :(02646) 220704/224687 z Bhubaneshwar : (0674) 2546415 z Chennai (044) 24899949/24853383\nz Chandigarh : (0172) 2639360 z Cochin : (0484) 2356668 z Coimbatore : (0422) 2472966 z Goa : (0832) 2542465 z Guwahati (0361) 2548793\nz Hyderabad : (040) 27662324/27662425 z Hubli (0836) 09343402597 z Indore : (0731) 504339/5061477 z Jaipur : (0141) 2235349\nz Jamshedpur: (0657) 2223848 z Lucknow :(0522) 2239044 z Nagercoil 09842134873 z Visakhapatnam : (0891) 2564850 / 2707607\nEstimating\nPacking\nConplast RMC444M1 is supplied in 5, 20 and 200 litre drums.\nStorage\nConplast RMC444M1 has a minimum shelf life of 12 months\nwhen stored under normal temperatures. It should be\nprotected from extreme temperatures and preferably stored\nin shade.\nPrecautions\nHealth & Safety\nConplast RMC444M1 is non-toxic. Any splashes on the skin\nshould be washed immediately with water. Splashes to the\neyes should be washed immediately with water and medical\nadvice should be sought.\nFire\nConplast RMC444M1 is non flammable.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Conplast RMC444M1", "RMC444M1 complies", "2546415 z Chennai", "2223848 z Lucknow", "2542465 z Guwahati", "09343402597 z Indore", "2356668 z Coimbatore", "26762799 z Ankleshwar", "produce high workable mix", "cement replacement materials", "recommendation specification", "produce high quality concrete", "Conplast constructive solutions", "2239044 z Nagercoil 09842134873 z Visakhapatnam", "560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 58, "imageuri": "https://productimages.withfloats.com/actual/633e7217a74b7500017bd42a.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/633e7217a74b7500017bd42a.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-06T06:13:37.363Z", "updatedon": "2022-10-06T06:13:37.363Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN//conplast-constructive-solutions-rmc444m1/58", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Admixtures", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "633e71d3bb4aaf0001e0b271", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Conplast constructive solutions ® P505(T)", "description": "Uses\n„ To improve the effectiveness of the water content of a\nconcrete mix\n„ At higher dosages to provide cost effective means of\nreducing concrete permeability and thereby reducing water\npenetration\nAdvantages\n„ Allows specified strength grades to be met at reduced\ncement content or increased workability\n„ Water reduction significantly improves compressive\nstrength at all ages and enhances durability through the\nproduction of low permeability concrete\n„ Minimises the risk of segregation and bleeding and assists\nin the production of a dense, close textured surface,\nimproving durability.\n„ Chloride free, safe for use in prestresses and reinforced\nconcrete\n„ Allows workability to be increased without adding extra\nwater\nStandards compliance\nConplast P505(T) plasticiser complies with BS 5075 Part 1\nand with ASTM C494 as Type B & D.\nDescription\nConplast P505(T) plasticiser is a chloride free and water\nreducing admixture based on selected sugar - reduced\nlignosulphonate materials. It is supplied as a brown solution\nwhich instantly disperses in water.\nConplast P505(T) plasticiser disperses the fine particles in\nthe concrete mix, enabling the water content of the concrete\nto perform more effectively and improving the consistency of\nthe concrete. This produces higher levels of workability for\nthe same water content, allowing benefits such as water\nreduction and increased strengths.\nTechnical support\nFosroc provides a technical advisory service for on-site\nassistance and advice on mix design, admixture selection,\nevaluation trials and dispensing equipment.\nDosage\nThe optimum dosage of Conplast P505(T) plasticiser to meet\nspecific requirements should always be determined by trials\nusing the materials and conditions that will be experienced\nin use. The normal dosage range is 0.4 to 1.0 litres/100 kg of\ncementitious material, including PFA, GGBFS or microsilica.\nUse at other dosages\nDosages outside the normal range quoted above can be\nused to meet particular mix requirements. Contact Fosroc\nfor advice in these cases.\nProperties\nAppearance Brown liquid\nSpecific gravity 1.190 - 1.210 at 270\nC\nChloride content Nil to BS 5075\nAir entrainment Typically less than 1% additional\nair is entrained at normal\ndosages\nInstructions for use\nCompatibility\nConplast P505(T) plasticiser is compatible with other Fosroc\nadmixtures used in the same concrete mix. All admixtures\nshould be added to the concrete separately and must not be\nmixed together prior to addition. The performance of concrete\ncontaining more than one admixture should be assessed by\ntrial mixes.\nConplast P505(T) plasticiser is suitable for use with all types\nof ordinary portland cements and cement replacement\nmaterials such as PFA, GGBFS and microsilica.\nDispensing\nThe correct quantity of Conplast P505(T) plasticiser should\nbe measured by means of a recommended dispenser. The\nadmixture should then be added to the concrete with the mixer\nwater to obtain the best results. Fosroc shall be contacted\nfor advice regarding suitable equipment and its installation.\nEffects of overdosing\nAn overdose of double the intended amount of Conplast\nP505(T) plasticiser will result in a significant increase in\nretardation as compared to that normally obtained at the\nintended dosage. Provided that adequate curing is\nmaintained, the ultimate strength of the concrete will not be\nimpaired by increased retardation and will generally be\nincreased. The effects of overdosing will be further increased\nif sulphate resisting cement or cement replacement materials\nare used.\nOverdosage may also cause increased air entrainment, which\nwill tend to reduce strength. The degree of this effect will\ndepend on the particular mix design and overdose level.\nConplast® P505(T)\nINDIA/2004/0106/A\nImportant note :\nFosroc products are guaranteed against defective materials and manufacture and are sold subject\nto its standard terms and conditions of sale, copies of which may be obtained on request. Whilst\nFosroc endeavours to ensure that any advice, recommendation specification or information it may\ngive is accurate and correct, it cannot, because it has no direct or continuous control over where\nor how its products are applied, accept any liability either directly or indirectly arising from the\nuse of its products whether or not in accordance with any advice, specification, recommendation\nor information given by it.\ntelephone fax e-mail\n++91 80-22240018/120 ++91 80-22233474 india@fosroc.com\nFosroc Chemicals (India) Pvt. Ltd.\nHead Office\n111/3, Hafeeza Chamber II Floor,\nK H Road, PBNo. 2744, Bangalore 560027\nwww.fosroc.com\n® Denotes the trademark of Fosroc International Limited\n Regional Offices\nBangalore Mumbai Delhi Kolkata\nShankar House, IV Floor 208/209, Persepolis First floor,1/2 East Patel Nagar P-569, Lake Terrace Extn.\n1 & 18, RMV Extension Sector 17, Vashi Opp: Vivek Cinema, Main Patel Rd First Floor\nBangalore 560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700 029\nPh:080-2361 3161/2361 2004 Ph:022-2789 6412/14 Ph:011-25884903/4 Ph: 033 24650917 / 55343188\nFax : 080-2361 7454 Fax: 022 - 2789 6413 Fax: 011- 25884422 Fax: 033-24650891\nemail: Bangalore@fosroc.com email:Mumbai@fosroc.com email:Delhi@fosroc.com email:Kolkata@fosroc.com\nz Ahmedabad : (079) 26762799 z Ankleshwar :(02646) 220704/224687 z Bhubaneshwar : (0674) 2546415 z Chennai (044) 24899949/24853383\nz Chandigarh : (0172) 2639360 z Cochin : (0484) 2356668 z Coimbatore : (0422) 2472966 z Goa : (0832) 2542465 z Guwahati (0361) 2548793\nz Hyderabad : (040) 27662324/27662425 z Hubli (0836) 09343402597 z Indore : (0731) 504339/5061477 z Jaipur : (0141) 2235349\nz Jamshedpur: (0657) 2223848 z Lucknow :(0522) 2239044 z Nagercoil 09842134873 z Visakhapatnam : (0891) 2564850 / 2707607\nEstimating\nPackaging\nConplast P505(T) plasticiser is available in 200 litre\ncontainers.\nStorage\nConplast P505(T) plasticiser has a minimum shelf life of 12\nmonths provided the temperature is kept within the range of\n20\nC to 500\n C. Should the temperature of the product fall outside\nthis range then contact local Fosroc office for advice.\nFreezing point : Approximately -30\nC\nPrecautions\nHealth and safety\nConplast P505(T) plasticiser does not fall into the hazard\nclassifications of current regulations. However, it should not\nbe swallowed or allowed to come into contact with skin and\neyes.\nSuitable protective gloves and goggles should be worn.\nSplashes on the skin should be removed with water. In case\nof contact with eyes rinse immediately with plenty of water\nand seek medical advice. If swallowed seek medical\nattention immediately - do not induce vomiting.\nFor further information consult the Material Safety Data sheet\navailable for this product.\nFire\nConplast P505(T) plasticiser is water based and\nnonflammable.\nCleaning and disposal\nSpillages of Conplast P505(T) plasticiser should be\nabsorbed onto sand, earth or vermiculite and transferred to\nsuitable containers. Remnants should be hosed down with\nlarge quantities of water.\nThe disposal of excess or waste material should be carried\nout in accordance with local legislation under the guidance\nof the local waste regulatory authority", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Conplast P505", "2546415 z Chennai", "2542465 z Guwahati", "09343402597 z Indore", "2356668 z Coimbatore", "plasticiser complies", "26762799 z Ankleshwar", "concrete permeability", "contact local Fosroc office", "recommendation specification", "Conplast constructive solutions", "meet particular mix requirements", "local waste regulatory authority", "2239044 z Nagercoil 09842134873 z Visakhapatnam", "560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 57, "imageuri": "https://productimages.withfloats.com/actual/633e71d50949fb000115b308.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/633e71d50949fb000115b308.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-06T06:12:35.254Z", "updatedon": "2022-10-06T06:12:35.254Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/conplast-constructive-solutions-p505-t-/57", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "FOSROC", "category": "Admixtures", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b35405b3b1d05029da7c6", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Graco 490 Airless Sprayer (Paint)", "description": "The new Ultra Max II 490 brings the leading technology and performance of Graco’s larger Ultra Max II models into these compact and lightweight sprayers.The 490 is the best choice for professionals looking for superior performance and control for daily use on residential jobs.\n\n\nProven Endurance Pump\n\n1. Long-life V-Max Blue Packings, Chromex Rod, and Hardened Stainless Steel cylinder\n2. QuikAccess intake valve to easily clean or clear debris\n\n\nLightweight Design\n\n1. Weighs only 19 kg\n2. Easy to carry\n\n\nExclusive Brushless DC Motor\n\n1. Compact, lightweight motor delivers higher horsepower per wall amp\n2. No brushes to replace\n3. Enclosed design protects internal motor components from dirt, dust and overspray to extend motor life\n\n\nSmartControl 2.0 Pressure Control\n\n1. Advanced microprocessor control delivers most consistent spray fan at all spraying pressures\n2. Zero deadband at lower spraying pressures makes the 490 ideal for fine finish spraying\n\n\nSwivel Inlet Suction Hose\n\n1. All aluminum construction is durable, lightweight, and rust-free\n2. No-tools removal of hose for cleaning or accessing inlet ball\n3. Easily swivels to reach buckets or cans\n4. Stands upright so it won’t tip cans over\n\n\nWelded Steel Frame\n1. Offset handle with rubber comfort grip provides comfortable carrying\n2. Welded steel cord wrap doubles as a chain “lock down”\n3. Choose Stand, Hi-Boy or Lo-Boy cart\n\n\nEasy Out Pump Filter\n\n1. Filtering reduces tip clogs and ensures a quality finish \n2. Easy Out design filters from the inside out so filters won’t get stuck or collapse 3. Filter removes with the cap for less mess", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "design filters", "new Ultra Max II", "spraying pressures", "Ultra Max II models", "rubber comfort grip", "superior performance", "consistent spray fan", "aluminum construction", "steel cord wrap doubles", "QuikAccess intake valve", "Hardened Stainless Steel", "internal motor components", "lightweight motor delivers", "Filtering reduces tip clogs", "Advanced microprocessor control delivers" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 16, "imageuri": "https://productimages.withfloats.com/actual/5a6832afb4716b070cb45275.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5a6832afb4716b070cb45275.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-01-24T07:15:59.21Z", "updatedon": "2022-10-06T04:48:00.464Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN//graco-490-airless-sprayer-paint-/16", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": -1, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Power Tools ", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b35405b3b1d05029da5c4", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Faz Anchor Bolts", "description": "Anchor bolt for push-through installation.\nWhen the hexagonal nut is tightened, the tapered bolt is pulled into the expansion clip and expands it against the drill hole wall.\nVersion FAZ made of stainless steel A4 for outdoor applications and for damp rooms. High corrosion-resistant steel (material number 1.4529) for applications in aggressive atmospheres.\nFAZ-GS with large pre-assembled washer for fixings in oblong holes.\n\n\nAdvantages/Benefits\n\n1. Optimized expansion clip ensures uniform load distribution for high permissible loads and small edge distances and axial with structural elements, as well as secure expansion, even in cracked concrete.\n2. Installation-friendly, since only a few revolutions are necessary to apply the torque.\n\n\nInstallation\n\nPush-through and pre-positioned installation\n\n\nInstallation tips\n\n1. For series installation we recommend the anchor bolt setting tool FABS (see page 119) to reduce installation time.\n2. Before driving in, the hexagon nut should be brought into the optimal installation position (the bolt projects by 2 to 3 mm).\n\n\nAlso suitable for:\n\n1. Concrete C12/15\n2. Natural stone with dense structure\n\n\nFor fixing of:\n\n1. Steel constructions\n2. Railings\n3. Consoles\n4. Ladders\n5. Cable trays\n6. Machines\n7. Staircases\n8. Gates\n9. Facades\n10. Window elements\n11. Wood constructions", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "tapered bolt", "Anchor Bolts", "bolt projects", "hexagonal nut", "Natural stone", "stainless steel A4", "series installation", "outdoor applications", "small edge distances", "high permissible loads", "Optimized expansion clip", "uniform load distribution", "optimal installation position" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 18, "imageuri": "https://productimages.withfloats.com/actual/5a682fd8b4716b070cb44fbf.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5a682fd8b4716b070cb44fbf.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-01-24T07:03:52.406Z", "updatedon": "2022-10-06T04:49:03.215Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/faz-anchor-bolts/18", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": -1, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Anchor Fastner", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b353f5b3b1d05029d942a", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Fosroc Rendroc RG", "description": "Renderoc RG is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-flowing non-shrink repair micro concrete. The material is based on Portland cements, graded aggregates and fillers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability. For larger repairs, the mixed Renderoc RG may be modified by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc office shall be consulted. It is suitable for various structural strengthening measures such as encasement build-ups, jacketing etc.\n\n\nAdvantages: \n\n1. Gaseous expansion system compensates for shrinkage and settlement in the plastic state.\n2. Can be pumped or poured into restricted locations.\n3. Highly fluid to allow for placement without vibration.\n4. Highly fluid to allow for placement without vibration.\n5. Highly fluid to allow for placement without vibration.\n6. High ultimate strengths and low permeability of cured repair.\n7. Contains no chloride admixture.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "clean water", "Highly fluid", "site addition", "minimising water", "low permeability", "mixed Renderoc RG", "various structural", "local Fosroc office", "high early strength", "low water requirement", "High ultimate strengths", "Gaseous expansion system", "expansion characteristics", "saturated surface dry aggregates" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 21, "imageuri": "https://productimages.withfloats.com/actual/5a6821f9cef7370a8014a8e3.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5a6821f9cef7370a8014a8e3.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-01-24T06:04:40.581Z", "updatedon": "2018-08-08T18:23:59.871Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/fosroc-rendroc-rg/21", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": null, "category": null, "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "65e09ec771015f176487ec45", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Fosroc Nitobond Ep Standard", "description": "Nitobond EP Standard is a two component epoxy bonding agent sup-plied in pre-weighed quantities for ready on-site mixing and use.\n\n1. Can be applied on concrete & mortar substrate\n2. Facilitates improvement in mechanical strength\n3. Good positive adhesion\n4. Helps in bonding old and new cementitious substrates\n5. Tools and equipment shall be cleaned thoroughly after use with Nitoflor Sol", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "old", "use", "site", "Helps", "Tools", "mixing", "weighed", "concrete", "equipment", "quantities", "improvement", "Nitoflor Sol", "mortar substrate", "mechanical strength", "Good positive adhesion", "new cementitious substrates", "Fosroc Nitobond Ep Standard", "two component epoxy bonding agent" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 80, "imageuri": "https://productimages.withfloats.com/actual/65e09ec96950dcb34e1a62e9.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/65e09ec96950dcb34e1a62e9.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-02-29T15:12:07.58Z", "updatedon": "2024-02-29T15:12:07.58Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/fosroc-nitobond-ep-standard/80", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Fosroc", "category": "FOSROC", "tags": [ "Epoxy bonding agent", "Fosroc" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }