Home> Products> pre

{ "products": [ { "_id": "65e09ec771015f176487ec45", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Fosroc Nitobond Ep Standard", "description": "Nitobond EP Standard is a two component epoxy bonding agent sup-plied in pre-weighed quantities for ready on-site mixing and use.\n\n1. Can be applied on concrete & mortar substrate\n2. Facilitates improvement in mechanical strength\n3. Good positive adhesion\n4. Helps in bonding old and new cementitious substrates\n5. Tools and equipment shall be cleaned thoroughly after use with Nitoflor Sol", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "old", "use", "site", "Helps", "Tools", "mixing", "weighed", "concrete", "equipment", "quantities", "improvement", "Nitoflor Sol", "mortar substrate", "mechanical strength", "Good positive adhesion", "new cementitious substrates", "Fosroc Nitobond Ep Standard", "two component epoxy bonding agent" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 80, "imageuri": "https://productimages.withfloats.com/actual/65e09ec96950dcb34e1a62e9.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/65e09ec96950dcb34e1a62e9.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-02-29T15:12:07.58Z", "updatedon": "2024-02-29T15:12:07.58Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/fosroc-nitobond-ep-standard/80", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Fosroc", "category": "FOSROC", "tags": [ "Epoxy bonding agent", "Fosroc" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "65e09d655a152415b4548dd2", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Fosroc Conbextra Ep75", "description": "1.Excellent durability - high compressive, flexural and tensile strengths ensure a long working life.\n2. Cost effective - high early strength gain promotes minimum downtime and early commissioning of plant.\n3. User friendly - simple, full pack mixing to ensure that the performance characteristics are achieved\n4. Versatile - suitable for a wide range of loading situations including repetitive dynamic loads.\n5. Excellent in service performance - non-shrink capability ensures full surface to surface contact", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "plant", "contact", "wide range", "4. Versatile", "full surface", "User friendly", "minimum downtime", "shrink capability", "tensile strengths", "long working life", "loading situations", "early commissioning", "service performance", "Fosroc Conbextra Ep75", "1.Excellent durability", "repetitive dynamic loads", "high early strength gain", "simple, full pack mixing", "high compressive, flexural", "performance characteristics" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 79, "imageuri": "https://productimages.withfloats.com/actual/65e09d66771c8dd9a9713e59.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/65e09d66771c8dd9a9713e59.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-02-29T15:06:13.255Z", "updatedon": "2024-02-29T15:06:13.255Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/fosroc-conbextra-ep75/79", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Fosroc ", "category": "FOSROC", "tags": [ "Fosroc", "Epoxy Resin Grout" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "634645f05e86a40001340741", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "JOINTS, SEALANTS AND WATERPROOFING", "description": "Fosroc’s extensive range of Joints, Sealants and Waterproofing , manufactured to the highest quality standards backed by independent test certificates.Flexible jointing materials filling gaps and sealing slots between two elements to provide future movement and sealing against wind, rain, fire and chemicals. Fosroc sealants can be found in many stadia throughout the world providing watertight and fire-rated seals.\n\n Fosroc include waterproof membranes, waterstops, joint sealants, concrete repair mortars, resin flooring, protective coatings, structural strengthening, grouts and concrete admixtures manufactured to the highest quality Standards. Fosroc offers one of the most comprehensive ranges in belowground waterproofing, providing leak-free buildings around the world.We have waterproofing systems providing the most up-to-date technologies from basement to roof to ensure long lasting integrity and durability of your building structure.\n\n Fosroc waterproofing products are available as preformed, torch-on or liquid or spray applied membranes. Fosroc also supply swelling waterstops, polyurea coatings and drainage membranes. Our range of sealants include the hioflex, Colpor, Nitoseal brands and a MS polymer façade sealant range. Fosroc fireproofing products include flexible intumescent sealants and one or two part ranges for all fire ratings.\n\nProducts: Thioflex, Colpor, Nitoseal\n\nFlexible materials enabling relative movement of components of a structure and preventing the ingress of water, wind or chemicals.\n\nOne-part easy installation, long service life\nLong established two-part range for transport sector\nWater industry suitable products\nMS Polymer façade range\nProducts:\nThiflex 600GG-PG\nNitoproof 100/120\nBrushbond\nBrushbond RFX\nBrushbond TGP\nBrushbond Coolcoat\nHydroproof", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Fosroc sealants", "extensive range", "polyurea coatings", "quality standards", "drainage membranes", "jointing materials", "concrete admixtures", "protective coatings", "waterproof membranes", "waterproofing systems", "long lasting integrity", "concrete repair mortars", "Fosroc fireproofing products", "Fosroc waterproofing products", "flexible intumescent sealants" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 65, "imageuri": "https://productimages.withfloats.com/actual/634645f7860d960001136b08.png", "tileimageuri": "https://productimages.withfloats.com/tile/634645f7860d960001136b08.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-12T04:43:28.628Z", "updatedon": "2022-10-12T04:43:28.628Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/joints-sealants-and-waterproofing/65", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "FOSROC", "category": "FOSROC", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "634644d32295d500012433e4", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "CONCRETE REPAIR", "description": "Aquaproof offers a comprehensive range of concrete repair and remediation solutions, meeting and exceeding industry standards; including our internationally proven Renderoc repair mortar products.\n\nCement and resin-based products for the reinstatement of defective concrete.\nStructural and non-structural repairs.\nLow, medium and high build solutions.\nRapid cure solutions.\nLong and distinguished track record.\nSelf compacting solutions.\nDesign compatibility.\nWe know that the long term strength and durability of reinforced concrete is affected by its quality and permeability. We have a variety of problem-solving products for difficult detailing and the making good of defects. Our products are user-friendly and designed to provide lasting solutions for the future of your concrete.\n\n Difference Between Structural and Non-Structural Cracks\nNon-structural Cracks: Non-structural cracks are caused by changes in the moisture content and thermal movement. They can occur anywhere in the foundation wall where there are openings in the wall. Non-structural cracks can also be caused by the following conditions:\n\nCreep\nVegetation/Trees\nShifting and Moving Foundation\nSettlement\nHydrostatic pressure\nSome characteristics of non-structural cracks include:\n\n1 to 2mm wide hairline cracks\nCracks at the corners of doors and windows\nVertical to diagonal cracks\nCracks on plaster\nNarrow, less than 1/8″\nStructural Cracks: Structural cracks are due to poor construction sites, swollen soil, poor soil bearing or overloading. These cracks are usually accompanied by other signs of foundation issues such as sticking doors and windows, slanted doors, sloping floors and cracks in porches. The common characteristics structural cracks include:\n\nContinuous horizontal cracks along walls\nVertical cracks that are wider at the top or bottom\nStair-step cracks\nFoundation wall cracks\nCracks in beams, foundation slabs\nAngled cracks that form in the corners of walls with a horizontal crack in the center\nCracks wider than 1/8″\nCracks extending to the upper levels of the home\nSolutions for Concrete Repair\nThe skills, knowledge, and experience required to repair damaged or deteriorated structures are decidedly different from those required to build new structures.\n\nProducts\nRepairs & Maintainance:\nRenderoc S2\nRenderoc HB2\nRenderoc RG ", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "concrete repair", "foundation wall", "horizontal cracks", "foundation issues", "poor construction", "2mm wide hairline", "industry standards", "long term strength", "comprehensive range", "following conditions", "remediation solutions", "deteriorated structures", "proven Renderoc repair mortar", "common characteristics structural cracks" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 62, "imageuri": "https://productimages.withfloats.com/actual/634644dc860d960001136ab2.png", "tileimageuri": "https://productimages.withfloats.com/tile/634644dc860d960001136ab2.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-12T04:38:43.356Z", "updatedon": "2022-10-12T04:38:43.356Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/concrete-repair/62", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "FOSROC", "category": "FOSROC", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63464477446afc000130fd2a", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "GROUTS AND ANCHORS", "description": "Cement and resin-based products to fill voids beneath (or between) load-bearing units. Resin-anchoring systems to install permanent and removable anchors and fixings.\n\nWith exceptional flow, stability and strength characteristics, our grouts provide the best solution for high precision and critical applications, together with a wide range of cement and resin based anchoring systems. The range of grouts and anchors is tested and outperforms industry laid norms and standards.\n\nExcellent chemical resistance\nLong and distinguished track record\nAssured bonding of critical fixings\nHigh strength high performance\nCost effective, project specific solutions\nProven technologies ensuring long term performance\n There is a wide range of structural grouts available from Fosroc. Fosrocs Grout Range is ideal for high intensity and high quality construction, we know that effective grouting and anchoring relies on more than strength alone.Cement and Epoxy resin grouts for construction applications including grouting baseplates, machine bases, rails and all sorts of voids in new construction and repair work\n\n Anchoring systems consist of epoxy, polyester and vinylester injection and anchoring systems suitable for application of threaded rods, bolts, reinforcing bars and starter bars into concrete and masonry.By utilising global experience and expertise, Fosroc grout and anchor solutions deliver some of the world’s most innovative product range.\n\nProducts\nGeneral Purpose Grouts:\n\nConbextra GP1\nConbextra GP2\nConbextra EP10 (M)\nCebex 100\nCebex 200\nLokfix Range", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "strength high", "systems suitable", "Anchoring systems", "removable anchors", "Epoxy resin grouts", "fill voids beneath", "innovative product", "Fosrocs Grout Range", "outperforms industry", "vinylester injection", "critical applications", "strength characteristics", "high quality construction", "construction applications", "structural grouts available" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 61, "imageuri": "https://productimages.withfloats.com/actual/634644781d46690001542228.png", "tileimageuri": "https://productimages.withfloats.com/tile/634644781d46690001542228.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-12T04:37:11.075Z", "updatedon": "2022-10-12T04:37:11.075Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/grouts-and-anchors/61", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "FOSROC", "category": "FOSROC", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "634642f7446afc000130fd08", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Admixtures", "description": "Admixtures are the ingredients in concrete other than portland cement, water, and aggregate that are added to the mix immediately before or during mixing. Admixtures are Liquid or powder products which modify and improve the properties of fresh and hardened concrete or mortar.\n\nAdmixtures play a vital role in production of quality concrete and mortars in all segments of the industry – Ready-mix, Precast and Site-batch. It is the ingredients in concrete other than cement, water and aggregate that is added to the mix immediately before or during mixing.\n\nProducts\nPlasticisers:Conplast P211\nSuperplasticisers:Conplast SP430\nCorrosion inhibitors:\nAir-entrainers\nPumping aids\nRetarders\nSpecialty admixtures\nAccelerators:Conplast NC \nWhy is admixture used?\nOver decades, attempts have been made to obtain concrete with certain desired characteristics such as high compressive strength, high workability, and high performance and durability parameters to meet the requirement of complexity of modern structures.\n\nThe properties commonly modified are the heat of hydration, accelerate or retard setting time, workability, water reduction, dispersion and air-entrainment, impermeability and durability factors.\n\nTypes of Admixtures\nChemical admixtures :\nAccelerators, Retarders, Water-reducing agents, Super plasticizers, Air entraining agents etc.\n\nMineral admixtures:\n Fly-ash Blast-furnace slag, Silica fume and Rice husk Ash etc.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Conplast NC", "impermeability", "water reduction", "portland cement", "characteristics", "powder products", "quality concrete", "high workability", "high performance", "Rice husk Ash etc", "Super plasticizers", "retard setting time", "durability parameters", "high compressive strength" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 59, "imageuri": "https://productimages.withfloats.com/actual/634642f7821b47000129bfac.png", "tileimageuri": "https://productimages.withfloats.com/tile/634642f7821b47000129bfac.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-12T04:30:47.511Z", "updatedon": "2022-10-12T04:30:47.511Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/admixtures/59", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "FOSROC", "category": "FOSROC", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "633e7211aa22bf0001371037", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Conplast constructive solutions ® RMC444M1", "description": "Uses\nConplast RMC444M1 is used where a high degree of\nworkability and its retention are required, where delays in\ntransportation or placing are likely or when high ambient\ntemperatures cause rapid slump loss. It facilitate production\nof high quality concrete.\nAdvantages\n„ Ready Mixed Concrete- Increased workability and\nworkability retention minimise the risks of long distance\ndeliveries\n„ Increased strength - Provides high early strength for\nprecast concrete if water reduction is taken advantage of.\n„ Improved quality - Denser, close textured concrete with\nreduced porosity and hence more durable.\n„ Higher cohesion - Risk of segregation and bleeding\nminimised; thus aids pumping of concrete\n„ Chloride free - Safe in prestressed concrete and with\nsulphate resisting cements and marine aggregates.\nStandards\nConplast RMC444M1 complies with IS:9103:1999 and\nBS:5075 Part 3 and ASTM-C-494 Type 'F' as a high range\nwater reducing admixture and Type G at high dosage.\nDescription\nConplast RMC444M1 is supplied as a brown liquid instantly\ndispersible in water.\nConplast RMC444M1 has been specially formulated to give\nhigh water reductions upto 25% without loss of workability or\nto produce high quality concrete of reduced permeability.\nProperties\nSpecific gravity 1.20 to 1.21 at 300\nC\nChloride content Nil. to IS:9103-1999and BS:5075\nAir entrainment Approx. 1.5% additional air\nover control\nCompatibility : Can be used with all types of cements except\nhigh alumina cement. Conplast RMC444M1 is compatible\nwith other types of Fosroc admixtures when added separately\nto the mix. Site trials should be carried out to optimise\ndosages. Conplast RMC444M1 is suitable for use with all\ntypes of OPC and cement replacement materials such as\nPFA, GGBFS and microsilica.\nWorkability : Can be used to produce flowing concrete that\nrequires no compaction. Some minor adjustments may be\nrequired to produce high workable mix without segregation.\nCohesion : Cohesion is improved due to dispersion of cement\nparticles thus minimising segregation and improving surface\nfinish.\nCompressive strength : Conplast RMC444M1 is primarily\nhighly efficient superplasticiser giving large increase in\nworkability without significant change in compressive\nstrength.\nConplast RMC444M1 may be used to produce substantial\nwater reduction resulting in a considerable increase in\ncompressive strength.\nDurability : Reduction in W/C ratio enables increase in density\nand impermeability thus enhancing durability of concrete.\nApplication instructions\nDosage\nThe optimum dosage is best determined by site trials with\nthe concrete mix which enables the effects of workability,\nstrength gain or cement reduction to be measured. Site trials\nwith Conplast RMC444M1 should always be compared with\nmix containing no admixture. As a guide, the rate of addition\nis generally in the range of 0.6 - 1.5 litres /100 kg cement. For\nany deviations in dosage in special applications, please\ncontact Fosroc Technical Services.\nOverdosing\nAn over dose of double the recommended amount of Conplast\nRMC444M1, will result in very high workability and some\nretardation of setting time will occur. However, the ultimate\ncompressive strength will not be impaired.\nDispensing\nThe measured quantity of Conplast RMC444M1 should be\nadded along with the gauging water. For best results, add\nConplast RMC444M1 in the last phase after prewetting the\nmix with 80% of the total water required.\nMix design\nFosroc has an advisory service on Concrete Mix Design and\ncan be contacted if assistance is required.\nConplast® RMC444M1\nINDIA/2005/01-120/A\nImportant note :\nFosroc products are guaranteed against defective materials and manufacture and are sold subject\nto its standard terms and conditions of sale, copies of which may be obtained on request. Whilst\nFosroc endeavours to ensure that any advice, recommendation specification or information it may\ngive is accurate and correct, it cannot, because it has no direct or continuous control over where\nor how its products are applied, accept any liability either directly or indirectly arising from the\nuse of its products whether or not in accordance with any advice, specification, recommendation\nor information given by it.\ntelephone fax e-mail\n++91 80-22240018/120 ++91 80-22233474 india@fosroc.com\nFosroc Chemicals (India) Pvt. Ltd.\nHead Office\n111/3, Hafeeza Chamber II Floor,\nK H Road, PBNo. 2744, Bangalore 560027\nwww.fosroc.com\n® Denotes the trademark of Fosroc International Limited\n Regional Offices\nBangalore Mumbai Delhi Kolkata\nShankar House, IV Floor 208/209, Persepolis First floor,1/2 East Patel Nagar P-569, Lake Terrace Extn.\n1 & 18, RMV Extension Sector 17, Vashi Opp: Vivek Cinema, Main Patel Rd First Floor\nBangalore 560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700 029\nPh:080-2361 3161/2361 2004 Ph:022-2789 6412/14 Ph:011-25884903/4 Ph: 033 24650917 / 55343188\nFax : 080-2361 7454 Fax: 022 - 2789 6413 Fax: 011- 25884422 Fax: 033-24650891\nemail: Bangalore@fosroc.com email:Mumbai@fosroc.com email:Delhi@fosroc.com email:Kolkata@fosroc.com\nz Ahmedabad : (079) 26762799 z Ankleshwar :(02646) 220704/224687 z Bhubaneshwar : (0674) 2546415 z Chennai (044) 24899949/24853383\nz Chandigarh : (0172) 2639360 z Cochin : (0484) 2356668 z Coimbatore : (0422) 2472966 z Goa : (0832) 2542465 z Guwahati (0361) 2548793\nz Hyderabad : (040) 27662324/27662425 z Hubli (0836) 09343402597 z Indore : (0731) 504339/5061477 z Jaipur : (0141) 2235349\nz Jamshedpur: (0657) 2223848 z Lucknow :(0522) 2239044 z Nagercoil 09842134873 z Visakhapatnam : (0891) 2564850 / 2707607\nEstimating\nPacking\nConplast RMC444M1 is supplied in 5, 20 and 200 litre drums.\nStorage\nConplast RMC444M1 has a minimum shelf life of 12 months\nwhen stored under normal temperatures. It should be\nprotected from extreme temperatures and preferably stored\nin shade.\nPrecautions\nHealth & Safety\nConplast RMC444M1 is non-toxic. Any splashes on the skin\nshould be washed immediately with water. Splashes to the\neyes should be washed immediately with water and medical\nadvice should be sought.\nFire\nConplast RMC444M1 is non flammable.", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Conplast RMC444M1", "RMC444M1 complies", "2546415 z Chennai", "2223848 z Lucknow", "2542465 z Guwahati", "09343402597 z Indore", "2356668 z Coimbatore", "26762799 z Ankleshwar", "produce high workable mix", "cement replacement materials", "recommendation specification", "produce high quality concrete", "Conplast constructive solutions", "2239044 z Nagercoil 09842134873 z Visakhapatnam", "560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 58, "imageuri": "https://productimages.withfloats.com/actual/633e7217a74b7500017bd42a.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/633e7217a74b7500017bd42a.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-06T06:13:37.363Z", "updatedon": "2022-10-06T06:13:37.363Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/conplast-constructive-solutions-rmc444m1/58", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Admixtures", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "633e71d3bb4aaf0001e0b271", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Conplast constructive solutions ® P505(T)", "description": "Uses\n„ To improve the effectiveness of the water content of a\nconcrete mix\n„ At higher dosages to provide cost effective means of\nreducing concrete permeability and thereby reducing water\npenetration\nAdvantages\n„ Allows specified strength grades to be met at reduced\ncement content or increased workability\n„ Water reduction significantly improves compressive\nstrength at all ages and enhances durability through the\nproduction of low permeability concrete\n„ Minimises the risk of segregation and bleeding and assists\nin the production of a dense, close textured surface,\nimproving durability.\n„ Chloride free, safe for use in prestresses and reinforced\nconcrete\n„ Allows workability to be increased without adding extra\nwater\nStandards compliance\nConplast P505(T) plasticiser complies with BS 5075 Part 1\nand with ASTM C494 as Type B & D.\nDescription\nConplast P505(T) plasticiser is a chloride free and water\nreducing admixture based on selected sugar - reduced\nlignosulphonate materials. It is supplied as a brown solution\nwhich instantly disperses in water.\nConplast P505(T) plasticiser disperses the fine particles in\nthe concrete mix, enabling the water content of the concrete\nto perform more effectively and improving the consistency of\nthe concrete. This produces higher levels of workability for\nthe same water content, allowing benefits such as water\nreduction and increased strengths.\nTechnical support\nFosroc provides a technical advisory service for on-site\nassistance and advice on mix design, admixture selection,\nevaluation trials and dispensing equipment.\nDosage\nThe optimum dosage of Conplast P505(T) plasticiser to meet\nspecific requirements should always be determined by trials\nusing the materials and conditions that will be experienced\nin use. The normal dosage range is 0.4 to 1.0 litres/100 kg of\ncementitious material, including PFA, GGBFS or microsilica.\nUse at other dosages\nDosages outside the normal range quoted above can be\nused to meet particular mix requirements. Contact Fosroc\nfor advice in these cases.\nProperties\nAppearance Brown liquid\nSpecific gravity 1.190 - 1.210 at 270\nC\nChloride content Nil to BS 5075\nAir entrainment Typically less than 1% additional\nair is entrained at normal\ndosages\nInstructions for use\nCompatibility\nConplast P505(T) plasticiser is compatible with other Fosroc\nadmixtures used in the same concrete mix. All admixtures\nshould be added to the concrete separately and must not be\nmixed together prior to addition. The performance of concrete\ncontaining more than one admixture should be assessed by\ntrial mixes.\nConplast P505(T) plasticiser is suitable for use with all types\nof ordinary portland cements and cement replacement\nmaterials such as PFA, GGBFS and microsilica.\nDispensing\nThe correct quantity of Conplast P505(T) plasticiser should\nbe measured by means of a recommended dispenser. The\nadmixture should then be added to the concrete with the mixer\nwater to obtain the best results. Fosroc shall be contacted\nfor advice regarding suitable equipment and its installation.\nEffects of overdosing\nAn overdose of double the intended amount of Conplast\nP505(T) plasticiser will result in a significant increase in\nretardation as compared to that normally obtained at the\nintended dosage. Provided that adequate curing is\nmaintained, the ultimate strength of the concrete will not be\nimpaired by increased retardation and will generally be\nincreased. The effects of overdosing will be further increased\nif sulphate resisting cement or cement replacement materials\nare used.\nOverdosage may also cause increased air entrainment, which\nwill tend to reduce strength. The degree of this effect will\ndepend on the particular mix design and overdose level.\nConplast® P505(T)\nINDIA/2004/0106/A\nImportant note :\nFosroc products are guaranteed against defective materials and manufacture and are sold subject\nto its standard terms and conditions of sale, copies of which may be obtained on request. Whilst\nFosroc endeavours to ensure that any advice, recommendation specification or information it may\ngive is accurate and correct, it cannot, because it has no direct or continuous control over where\nor how its products are applied, accept any liability either directly or indirectly arising from the\nuse of its products whether or not in accordance with any advice, specification, recommendation\nor information given by it.\ntelephone fax e-mail\n++91 80-22240018/120 ++91 80-22233474 india@fosroc.com\nFosroc Chemicals (India) Pvt. Ltd.\nHead Office\n111/3, Hafeeza Chamber II Floor,\nK H Road, PBNo. 2744, Bangalore 560027\nwww.fosroc.com\n® Denotes the trademark of Fosroc International Limited\n Regional Offices\nBangalore Mumbai Delhi Kolkata\nShankar House, IV Floor 208/209, Persepolis First floor,1/2 East Patel Nagar P-569, Lake Terrace Extn.\n1 & 18, RMV Extension Sector 17, Vashi Opp: Vivek Cinema, Main Patel Rd First Floor\nBangalore 560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700 029\nPh:080-2361 3161/2361 2004 Ph:022-2789 6412/14 Ph:011-25884903/4 Ph: 033 24650917 / 55343188\nFax : 080-2361 7454 Fax: 022 - 2789 6413 Fax: 011- 25884422 Fax: 033-24650891\nemail: Bangalore@fosroc.com email:Mumbai@fosroc.com email:Delhi@fosroc.com email:Kolkata@fosroc.com\nz Ahmedabad : (079) 26762799 z Ankleshwar :(02646) 220704/224687 z Bhubaneshwar : (0674) 2546415 z Chennai (044) 24899949/24853383\nz Chandigarh : (0172) 2639360 z Cochin : (0484) 2356668 z Coimbatore : (0422) 2472966 z Goa : (0832) 2542465 z Guwahati (0361) 2548793\nz Hyderabad : (040) 27662324/27662425 z Hubli (0836) 09343402597 z Indore : (0731) 504339/5061477 z Jaipur : (0141) 2235349\nz Jamshedpur: (0657) 2223848 z Lucknow :(0522) 2239044 z Nagercoil 09842134873 z Visakhapatnam : (0891) 2564850 / 2707607\nEstimating\nPackaging\nConplast P505(T) plasticiser is available in 200 litre\ncontainers.\nStorage\nConplast P505(T) plasticiser has a minimum shelf life of 12\nmonths provided the temperature is kept within the range of\n20\nC to 500\n C. Should the temperature of the product fall outside\nthis range then contact local Fosroc office for advice.\nFreezing point : Approximately -30\nC\nPrecautions\nHealth and safety\nConplast P505(T) plasticiser does not fall into the hazard\nclassifications of current regulations. However, it should not\nbe swallowed or allowed to come into contact with skin and\neyes.\nSuitable protective gloves and goggles should be worn.\nSplashes on the skin should be removed with water. In case\nof contact with eyes rinse immediately with plenty of water\nand seek medical advice. If swallowed seek medical\nattention immediately - do not induce vomiting.\nFor further information consult the Material Safety Data sheet\navailable for this product.\nFire\nConplast P505(T) plasticiser is water based and\nnonflammable.\nCleaning and disposal\nSpillages of Conplast P505(T) plasticiser should be\nabsorbed onto sand, earth or vermiculite and transferred to\nsuitable containers. Remnants should be hosed down with\nlarge quantities of water.\nThe disposal of excess or waste material should be carried\nout in accordance with local legislation under the guidance\nof the local waste regulatory authority", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Conplast P505", "2546415 z Chennai", "2542465 z Guwahati", "09343402597 z Indore", "2356668 z Coimbatore", "plasticiser complies", "26762799 z Ankleshwar", "concrete permeability", "contact local Fosroc office", "recommendation specification", "Conplast constructive solutions", "meet particular mix requirements", "local waste regulatory authority", "2239044 z Nagercoil 09842134873 z Visakhapatnam", "560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 57, "imageuri": "https://productimages.withfloats.com/actual/633e71d50949fb000115b308.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/633e71d50949fb000115b308.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-06T06:12:35.254Z", "updatedon": "2022-10-06T06:12:35.254Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/conplast-constructive-solutions-p505-t-/57", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "FOSROC", "category": "Admixtures", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "633e718e82ec380001736e62", "fptag": "CIVITECHSERVICES", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Conplast constructive solutions ® MS", "description": "Uses\nConplast MS micro silica is primarily used to improve the\nproperties of hardened concrete where a reduction in\npermeability, increased durability and resistance to chlorides,\nsulphates, abrasion, frost attack and alkali silica reaction are\nrequired.\nAdvantages\n„ Significantly reduces permeability by minimising the\npenetration of moisture and aggressive elements\n„ Significant reduction in chloride ion penetration by reducing\ncontinuous capillary pores\n„ Improved mechanical properties\nDescription\nConplast MS supplied as a fine powder is added to the\nconcrete mix early during the mixing process. The resultant\nlow permeability concrete will exhibit improved mechanical\nproperties, and increased resistance to the effects of\nchlorides, sulphates, gases, frost attack and alkali silica\nreaction.\nTechnical Support\nFosroc provides a technical advisory service for on-site\nassistance and advice on admixture selection, evaluation\ntrials and dispensing equipment. Technical data and\nguidance can be provided for admixtures and other products\nfor use with fresh and hardened concrete.\nStandards compliance\nConforms to ASTM C1240-95a.\nDosage\nTypically 4 to 10% by weight of cement depending upon the\nspecific need. The optimum dosage of Conplast MS to meet\nspecific requirements should always be determined by trials\nusing the materials and conditions that will be experienced\nin use.\nPlease note higher addition levels are generally required\nwhere the high performance concrete such as high strength\nconcrete or underwater concrete is a pre-requisite.\nProperties\nChemical analysis\nSiO2 Min. 85%\nAlkalies as Na2\nO Max. 1%\nLoss on ignition Max.5%\nBulk density Approx. 610 kg/m3\nApplication instructions\nDispensing and mixing\nConplast MS should always be added in the early stages of\nthe mixing process. It is recommended that Conplast MS be\nweight batched to the required quantity prior to addition to the\nmix.\nIn dry batching operations, Conplast MS should be dry\nblended with aggregates and cement prior to the addition of\nwater to the mixer. In wet batching operations Conplast MS\nshould be added to the mixer at the same time as the cement.\nConplast MS can if required, be added to the mixer in slurry\nform.\nIn order to achieve a low water cement ratio, the use of high\nrange water reducing admixtures such as Conplast SP430,\nConplast SP423 are highly recommended.\nPlacing\nWhen producing concrete with Conplast MS we suggest a\ntarget slump in the range of 25 to 35 mm in excess of the\nnormal slump requirement, this will accomodate the additional\ncohesion promoted by the use of Conplast MS.\nConcrete produced with Conplast MS will have greatly\nimproved cohesive qualities.\nEstimating\nPackaging\nConplast MS is available in 15 kg bags.\nStorage\nConplast MS has a minimum shelf life of 12 months if stored\nin a dry location in unopened packs\nConplast® MS\nINDIA/2005/0121/D\nImportant note :\nFosroc products are guaranteed against defective materials and manufacture and are sold subject\nto its standard terms and conditions of sale, copies of which may be obtained on request. Whilst\nFosroc endeavours to ensure that any advice, recommendation specification or information it may\ngive is accurate and correct, it cannot, because it has no direct or continuous control over where\nor how its products are applied, accept any liability either directly or indirectly arising from the\nuse of its products whether or not in accordance with any advice, specification, recommendation\nor information given by it.\ntelephone fax e-mail\n++91 80-22240018/120 ++91 80-22233474 india@fosroc.com\nFosroc Chemicals (India) Pvt. Ltd.\nHead Office\n111/3, Hafeeza Chamber II Floor,\nK H Road, PBNo. 2744, Bangalore 560027\nwww.fosroc.com\n® Denotes the trademark of Fosroc International Limited\n Regional Offices\nBangalore Mumbai Delhi Kolkata\nShankar House, IV Floor 208/209, Persepolis First floor,1/2 East Patel Nagar P-569, Lake Terrace Extn.\n1 & 18, RMV Extension Sector 17, Vashi Opp: Vivek Cinema, Main Patel Rd First Floor\nBangalore 560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700 029\nPh:080-2361 3161/2361 2004 Ph:022-2789 6412/14 Ph:011-25884903/4 Ph: 033 24650917 / 55343188\nFax : 080-2361 7454 Fax: 022 - 2789 6413 Fax: 011- 25884422 Fax: 033-24650891\nemail: Bangalore@fosroc.com email:Mumbai@fosroc.com email:Delhi@fosroc.com email:Kolkata@fosroc.com\nz Ahmedabad : (079) 26762799 z Ankleshwar :(02646) 220704/224687 z Bhubaneshwar : (0674) 2546415 z Chennai (044) 24899949/24853383\nz Chandigarh : (0172) 2639360 z Cochin : (0484) 2356668 z Coimbatore : (0422) 2472966 z Goa : (0832) 2542465 z Guwahati (0361) 2548793\nz Hyderabad : (040) 27662324/27662425 z Hubli (0836) 09343402597 z Indore : (0731) 504339/5061477 z Jaipur : (0141) 2235349\nz Jamshedpur: (0657) 2223848 z Lucknow :(0522) 2239044 z Nagercoil 09842134873 z Visakhapatnam : (0891) 2564850 / 2707607\nPrecautions\nHealth and Safety\nConplast MS is non-flammable. It may cause dust pollution\nand irritation to respiratory tract. Hence wear suitable dust\nmask, protective gloves and goggles while handling the\nmaterial. Incase of contact with eyes, rinse immediately with\nplenty of water and seek medical advice. If swallowed, seek\nmedical attention immediately - do not induce vomitting.\nCleaning and disposal\nThe disposal of excess or waste material should be carried\nout in accordance with local statutory requirements.\nAdditional Information\nIn addition to concrete admisture, Fosroc manufactures a\nwide range of complementary products which includes\nwaterproofing membranes, joint sealants, grouts and anchors\nand specialised flooring materials.\nAdditionally, a wide range of products specifically designed\nfor the repair and refurbishment of damaged reinforced\nconcrete is available.\nThis include hand-placed and spray-grade repair mortars,\nfluid micro-concretes, chemical resistant epoxy mortars and\na comprehensive package of protective coatings.\nFor further information please contact your local Fosroc office", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Conplast MS", "MS micro silica", "2639360 z Cochin", "2546415 z Chennai", "2223848 z Lucknow", "2542465 z Guwahati", "09343402597 z Indore", "2356668 z Coimbatore", "26762799 z Ankleshwar", "high performance concrete", "recommendation specification", "Conplast constructive solutions", "chemical resistant epoxy mortars", "2239044 z Nagercoil 09842134873 z Visakhapatnam", "560 080 Navi Mumbai 400 703 New Delhi 110 008 Kolkata 700" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 56, "imageuri": "https://productimages.withfloats.com/actual/633e718fc053710001311310.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/633e718fc053710001311310.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-06T06:11:26.004Z", "updatedon": "2022-10-06T06:11:26.004Z", "buyonlinelink": null, "producturl": "http://WWW.CIVITECHSERVICES.IN/products/conplast-constructive-solutions-ms/56", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "FOSROC", "category": "Admixtures", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }