Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108042783642 (International callers) or 08042783642 (Indian callers).
Anchor bolt for push-through and pre-positioned installation.
When the hexagon nut is tightened, the tapered bolt is pulled into the expansion clip and expands it against the drill hole wall.
Stainless steel version of the corrosion resistance class III, e.g. A4, for outdoor use and in damp conditions.
GS version with large washer for timber construction.
Advantages/Benefits :
1. FBN II offers maximum load-bearing capacity in non-cracked concrete – anchoring base can not bear higher loads - is totally
utilised.
2. Reduced anchorage depth reduces drill time – this saves time and reduces
reinforcement hits during drilling.
3. Long thread allows stand-off installations and variable usable lengths.
4. Diameter 8 to 20 mm also for reduced anchorage depths, e.g. for small loads
or if reinforcement is hit.
5. Embossed letter on the head for subsequent control of the installation as it
indicates the setting depth.
Installation
Push-through and pre-positioned installation
Installation tips
1. For series installation we recommend the Anchor bolt setting tool FABS (see
page 123) to reduce installation time.
2. Before driving in, the hexagon nut should be brought into the optimal
installation position (the bolt projects by 2 to 3 mm).
Also suitable for :
1. Concrete C12/15
2. Natural stone with dense structure
For fixing of:
1. Steel constructions
2. Railings
3. Consoles
4. Ladders
5. Cable trays
6. Machines
7. Staircases
8. Gates
9. Facades
10. Window elements
11. Wood constructions
Nitobond EP Standard is a two component epoxy bonding agent sup-plied in pre-weighed quantities for ready on-site mixing and use.
1. Can be applied on concrete & mortar substrate
2. Facilitates improvement in mechanical strength
3. Good positive adhesion
4. Helps in bonding old and new cementitious substrates
5. Tools and equipment shall be cleaned thoroughly after use with Nitoflor Sol
1.Excellent durability - high compressive, flexural and tensile strengths ensure a long working life.
2. Cost effective - high early strength gain promotes minimum downtime and early commissioning of plant.
3. User friendly - simple, full pack mixing to ensure that the performance characteristics are achieved
4. Versatile - suitable for a wide range of loading situations including repetitive dynamic loads.
5. Excellent in service performance - non-shrink capability ensures full surface to surface contact
1, Provides good bond to concrete, masonry, stone work, plaster and block work
2. Improves tensile and flexural properties of mortar
3. Compatible with all common hydraulic cements
4. No bleeding and segregation
5. Nitobond AR Std. bonding aid has a shelf life of 12 months
FOSROC
product-detail-entry-exit
Mangalam Heights, Block No. c -8, 1st Floor, Model Mill Square, Ganeshpeth, - 440018, Maharashtra
