anchor fastner

Anchor bolt for push-through installation. When the hexagonal nut is tightened, the tapered bolt is pulled into the expansion clip and expands it against the drill hole wall. Version FAZ made of stainless steel A4 for outdoor applications and for damp rooms. High corrosion-resistant steel (material number 1.4529) for applications in aggressive atmospheres. FAZ-GS with large pre-assembled washer for fixings in oblong holes. Advantages/Benefits 1. Optimized expansion clip ensures uniform load distribution for high permissible loads and small edge distances and axial with structural elements, as well as secure expansion, even in cracked concrete. 2. Installation-friendly, since only a few revolutions are necessary to apply the torque. Installation Push-through and pre-positioned installation Installation tips 1. For series installation we recommend the anchor bolt setting tool FABS (see page 119) to reduce installation time. 2. Before driving in, the hexagon nut should be brought into the optimal installation position (the bolt projects by 2 to 3 mm). Also suitable for: 1. Concrete C12/15 2. Natural stone with dense structure For fixing of: 1. Steel constructions 2. Railings 3. Consoles 4. Ladders 5. Cable trays 6. Machines 7. Staircases 8. Gates 9. Facades 10. Window elements 11. Wood constructions

Anchor bolt for push-through and pre-positioned installation. When the hexagon nut is tightened, the tapered bolt is pulled into the expansion clip and expands it against the drill hole wall. Stainless steel version of the corrosion resistance class III, e.g. A4, for outdoor use and in damp conditions. GS version with large washer for timber construction. Advantages/Benefits : 1. FBN II offers maximum load-bearing capacity in non-cracked concrete – anchoring base can not bear higher loads - is totally utilised. 2. Reduced anchorage depth reduces drill time – this saves time and reduces reinforcement hits during drilling. 3. Long thread allows stand-off installations and variable usable lengths. 4. Diameter 8 to 20 mm also for reduced anchorage depths, e.g. for small loads or if reinforcement is hit. 5. Embossed letter on the head for subsequent control of the installation as it indicates the setting depth. Installation Push-through and pre-positioned installation Installation tips 1. For series installation we recommend the Anchor bolt setting tool FABS (see page 123) to reduce installation time. 2. Before driving in, the hexagon nut should be brought into the optimal installation position (the bolt projects by 2 to 3 mm). Also suitable for : 1. Concrete C12/15 2. Natural stone with dense structure For fixing of: 1. Steel constructions 2. Railings 3. Consoles 4. Ladders 5. Cable trays 6. Machines 7. Staircases 8. Gates 9. Facades 10. Window elements 11. Wood constructions