Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108042783642 (International callers) or 08042783642 (Indian callers).
Best performance mortar in the shuttle cartridge based on epoxy resin.
Optimum solution for concrete (anchor rods and reinforcement bars).
Resin and hardener are stored in two separate chambers and are not mixed and activated until pushed through the static mixer.
Partially used cartridges can easily be reused by changing the static mixer.
Advantages/Benefits :
1. Very good bonding of the mortar ensures highest loads in concrete.
2. Suitable for underwater installations.Suitable for diamond drilled holes.
3. Expansion-free anchoring allows low axial spacings and edge distances.
4. Ergonomic application guns for quick and easy installation.
Accessories/Recommended loads
1. For fi xing in concrete, see page 81 et seq.
2. Appropriate application guns, see page 111/112
Suitable for:
1. Non-cracked concrete
2. Reinforcement bars
For fixing of:
1. Steel constructions
2. Consoles
3. Machines
4. Staircases
5. High-racks
6. Wooden constructions
7. Reinforcement bars
Nitobond EP Standard is a two component epoxy bonding agent sup-plied in pre-weighed quantities for ready on-site mixing and use.
1. Can be applied on concrete & mortar substrate
2. Facilitates improvement in mechanical strength
3. Good positive adhesion
4. Helps in bonding old and new cementitious substrates
5. Tools and equipment shall be cleaned thoroughly after use with Nitoflor Sol
1.Excellent durability - high compressive, flexural and tensile strengths ensure a long working life.
2. Cost effective - high early strength gain promotes minimum downtime and early commissioning of plant.
3. User friendly - simple, full pack mixing to ensure that the performance characteristics are achieved
4. Versatile - suitable for a wide range of loading situations including repetitive dynamic loads.
5. Excellent in service performance - non-shrink capability ensures full surface to surface contact
1, Provides good bond to concrete, masonry, stone work, plaster and block work
2. Improves tensile and flexural properties of mortar
3. Compatible with all common hydraulic cements
4. No bleeding and segregation
5. Nitobond AR Std. bonding aid has a shelf life of 12 months
FOSROC
product-detail-entry-exit
Mangalam Heights, Block No. c -8, 1st Floor, Model Mill Square, Ganeshpeth, - 440018, Maharashtra
