Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108042783642 (International callers) or 08042783642 (Indian callers).
High range water reducing and retarding admixture-Conplast SP430G8
Description:
Super plasticising admixture
USES:
To produce pampable concrete,high strength,high grade concrete by substantial reduction in water resulting in low permeablity and high early strength.To produce high workability concrete requiring little or no vibration during placing.
Advantages:
1. Improved workability - Easier, quicker placing and compaction
2. Increased strength - Provides high early strength for precast concrete with the
advantage of higher water reduction ability
3. Improved quality - Denser, close textured concrete with reduced porosity and
hence more durable
4. Higher cohesion - Risk of segregation and bleeding minimized, thus aids
pumping of concrete
5. Chloride free - Safe in prestressed concrete and with sulphate resisting
cements and marine aggregates
Key Properties
Specific gravity : 1.24 to 1.26
Chloride content : Nil to IS 456
Air entrainment: Approx. 1% additional air is entrained
Dosage range:
Approx.0.5-2.0liters /100kg containers
Buy Fosroc conplast SP430G8 Admixture in Jamshedpur, Ranchi, Patna, Across Jharkhand and Bihar.
Nitobond EP Standard is a two component epoxy bonding agent sup-plied in pre-weighed quantities for ready on-site mixing and use.
1. Can be applied on concrete & mortar substrate
2. Facilitates improvement in mechanical strength
3. Good positive adhesion
4. Helps in bonding old and new cementitious substrates
5. Tools and equipment shall be cleaned thoroughly after use with Nitoflor Sol
1.Excellent durability - high compressive, flexural and tensile strengths ensure a long working life.
2. Cost effective - high early strength gain promotes minimum downtime and early commissioning of plant.
3. User friendly - simple, full pack mixing to ensure that the performance characteristics are achieved
4. Versatile - suitable for a wide range of loading situations including repetitive dynamic loads.
5. Excellent in service performance - non-shrink capability ensures full surface to surface contact
1, Provides good bond to concrete, masonry, stone work, plaster and block work
2. Improves tensile and flexural properties of mortar
3. Compatible with all common hydraulic cements
4. No bleeding and segregation
5. Nitobond AR Std. bonding aid has a shelf life of 12 months
FOSROC
product-detail-entry-exit
Mangalam Heights, Block No. c -8, 1st Floor, Model Mill Square, Ganeshpeth, - 440018, Maharashtra
