Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108042783642 (International callers) or 08042783642 (Indian callers).
Renderoc RG is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-flowing non-shrink repair micro concrete. The material is based on Portland cements, graded aggregates and fillers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability. For larger repairs, the mixed Renderoc RG may be modified by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc office shall be consulted. It is suitable for various structural strengthening measures such as encasement build-ups, jacketing etc.
Advantages:
1. Gaseous expansion system compensates for shrinkage and settlement in the plastic state.
2. Can be pumped or poured into restricted locations.
3. Highly fluid to allow for placement without vibration.
4. Highly fluid to allow for placement without vibration.
5. Highly fluid to allow for placement without vibration.
6. High ultimate strengths and low permeability of cured repair.
7. Contains no chloride admixture.
Nitobond EP Standard is a two component epoxy bonding agent sup-plied in pre-weighed quantities for ready on-site mixing and use.
1. Can be applied on concrete & mortar substrate
2. Facilitates improvement in mechanical strength
3. Good positive adhesion
4. Helps in bonding old and new cementitious substrates
5. Tools and equipment shall be cleaned thoroughly after use with Nitoflor Sol
1.Excellent durability - high compressive, flexural and tensile strengths ensure a long working life.
2. Cost effective - high early strength gain promotes minimum downtime and early commissioning of plant.
3. User friendly - simple, full pack mixing to ensure that the performance characteristics are achieved
4. Versatile - suitable for a wide range of loading situations including repetitive dynamic loads.
5. Excellent in service performance - non-shrink capability ensures full surface to surface contact
1, Provides good bond to concrete, masonry, stone work, plaster and block work
2. Improves tensile and flexural properties of mortar
3. Compatible with all common hydraulic cements
4. No bleeding and segregation
5. Nitobond AR Std. bonding aid has a shelf life of 12 months
FOSROC
product-detail-entry-exit
Mangalam Heights, Block No. c -8, 1st Floor, Model Mill Square, Ganeshpeth, - 440018, Maharashtra
