Products

Renderoc RG is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-flowing non-shrink repair micro concrete. The material is based on Portland cements, graded aggregates and fillers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability. For larger repairs, the mixed Renderoc RG may be modified by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc office shall be consulted. It is suitable for various structural strengthening measures such as encasement build-ups, jacketing etc. Advantages: 1. Gaseous expansion system compensates for shrinkage and settlement in the plastic state. 2. Can be pumped or poured into restricted locations. 3. Highly fluid to allow for placement without vibration. 4. Highly fluid to allow for placement without vibration. 5. Highly fluid to allow for placement without vibration. 6. High ultimate strengths and low permeability of cured repair. 7. Contains no chloride admixture.

High range water reducing and retarding admixture-Conplast SP430G8 Description: Super plasticising admixture USES: To produce pampable concrete,high strength,high grade concrete by substantial reduction in water resulting in low permeablity and high early strength.To produce high workability concrete requiring little or no vibration during placing. Advantages: 1. Improved workability - Easier, quicker placing and compaction 2. Increased strength - Provides high early strength for precast concrete with the advantage of higher water reduction ability 3. Improved quality - Denser, close textured concrete with reduced porosity and hence more durable 4. Higher cohesion - Risk of segregation and bleeding minimized, thus aids pumping of concrete 5. Chloride free - Safe in prestressed concrete and with sulphate resisting cements and marine aggregates Key Properties Specific gravity : 1.24 to 1.26 Chloride content : Nil to IS 456 Air entrainment: Approx. 1% additional air is entrained Dosage range: Approx.0.5-2.0liters /100kg containers Buy Fosroc conplast SP430G8 Admixture in Jamshedpur, Ranchi, Patna, Across Jharkhand and Bihar.